Self-contained breathing apparatus (SCBA)
MSA M1
MSA's most advanced, ergonomic and modular SCBA, developed together with firefighters: configured to your needs and budget and upgradable in the field at any time.
EN 137300 bar10-year warranty
MSA – The Safety Company, in Kosovo through TEKNIKU
MSA equipment by category
Respiratory, head and fall protection, gas detection, self-rescue and confined-space entry – the current MSA range for firefighters and industry.
Short-duration SCBA and escape
PremAire and MASS Trolley
PremAire supplies breathing air for about 15 minutes – for short checks, inspections or emergency escape. The MASS Trolley provides a mobile source of compressed air.
~15 min3S full-face mask
Filter masks
Advantage 3000 and 420
The Advantage 3000 full-face mask and the Advantage 420/400 half masks, with high comfort and fit, used with particle filters and combined filters.
EN 148 filtersBayonet or thread
Filter escape device
miniSCAPE
With TabTec filter technology, single use, 5 minutes of service time; protects against gases of types A, B and K. Fits in a pocket or hangs on a belt.
5 minDIN 58647-7Code 10038560
Filtering escape half mask
MSR 1 and MSR 2
Protection against gases of types A, B, E and K; the MSR 2 also protects against particles (P2). In a rugged canister with a belt clip.
15 minDIN 58647-7
Smoke hood
S-CAP
Protects breathing, eyes and head from fire smoke and gases, including carbon monoxide. Also suitable for people who wear glasses.
15 minEN 403
Emergency respirator
Smoke hood
Designed to the requirements of the North Sea oil industry; protects against smoke, CO and radiant heat.
15 minEN 403
CO filter self-rescuers
W 65-2 and W 95
For underground fires and explosions in mines: protection against carbon monoxide. The W 95 is for extended escape routes.
EN 404120 min
SSR 30/100 · SavOx · SavOxCap 60 · SSR 90 K60
Oxygen self-rescuers
Independent air supply through KO₂ regeneration, for atmospheres with low oxygen or toxic contaminants. At rest they last at least three times the rated duration.
20–60 minEN 13794
Protection table
Filter devices are the most economical choice when the hazard is well known; chemical-oxygen systems give the highest level of protection.
| Device | ABEK gases and vapours | Fire gases | Carbon monoxide | Particles, dust | Oxygen deficiency | Eyes | Minutes |
|---|---|---|---|---|---|---|---|
| miniSCAPE | 5 | ||||||
| MSR 1 | 15 | ||||||
| MSR 2 | 15 | ||||||
| S-CAP | 15 | ||||||
| Smoke hood | 15 | ||||||
| W 65-2 | 120 | ||||||
| W 95 | 120 | ||||||
| SSR 30/100 | 20 | ||||||
| SavOxCap 60 | 60 | ||||||
| SavOx | 30 | ||||||
| SSR 90 K60 | 60 |
Firefighter helmet
GALLET F1XF
The iconic firefighter helmet, made and assembled in France: for everyday and complex structural firefighting, technical rescue and wildland fires.
EN 443:2008EN 16471 · EN 16473GS-ET-29 class 1
All-round industrial helmet
V-Gard
An ideal, economical solution for many industrial applications: UV-stabilised HDPE shell in 6 colours, with 4 types of headband.
EN 397EN 50365 cl. 0ATEX (INERIS)269 g
Lightweight industrial helmet
V-Gard 520
A light, comfortable helmet with a short peak, a Fas-Trac III headband and an elastic strap that keep it stable even when the wearer bends over.
Code GV969-60008404-point chin strap
Helmet for electrical workers with integrated visor
V-Gard 950
Full head and face protection, developed with workers and safety officers of energy companies across Europe.
GS-ET-29 class 14 kA4-point chin strap
Face protection
Arc flash visors
Visors certified with the “8” marking to EN 166 and tested against real arcs to GS-ET-29; combined with the left/RIGHT ear defenders.
EN 166 “8”GS-ET-29 class 1 and 2
Hearing protection
left/RIGHT ear defenders
Ear defenders that fit every ear shape and size, in low, medium and high attenuation; the yellow version is ideal in low light.
10087425 · headband10087428 · helmet-mounted
Helmet system
V-Gard 900 series and accessories
A premium helmet system with integrated face and eye protection, plus accessories certified as a system: visors, ear defenders, chin straps, seasonal liners.
Logo printing8 shell colours
Standards for electrical workers
Equipment is selected on the basis of an individual risk assessment.
| Standard | What it covers |
|---|---|
| EN 397 · 440 V AC | Optional requirement for helmets: brief accidental contact with live conductors (tested at 1200 V AC) |
| EN 50365 · class 0 | Insulating helmets up to 1000 V AC / 1500 V DC, tested at 10,000 V; marked with a triangle |
| EN 166 · “8” marking | Visors against short-circuit electric arcs up to 12 kA, 380–400 V, 50 Hz, max. 1 s |
| GS-ET-29 | “Box test” arc at 400 V: class 1 – 4 kA, 135 kJ/m² · class 2 – 7 kA, 423 kJ/m² |
| ASTM F1959 | Arc thermal performance value for materials; V-Gard Supreme liner: 8 cal/cm² |
Single- or dual-gas detector
ALTAIR 2X
The first single- or dual-gas detector with XCell sensors: very rugged, with a low cost of ownership and full traceability – ideal for CO call-outs to homes.
IP677.6 m drop3-year warranty
Hydrogen cyanide detector
ALTAIR Pro HCN
For detecting HCN during the overhaul phase after a fire, when smouldering materials release dangerous gas. Standard battery and one-button operation.
HCNIP6795 dB alarm
Four-gas detector
ALTAIR 4XR
The most rugged and reliable four-gas detector: XCell sensors with a response under 15 seconds, a 20-hour battery and an expected life of 5 years; in charcoal or glow-in-the-dark.
IP687.6 m drop4-year warranty
Cellular-connected detector
ALTAIR io 4
Four-gas detector with built-in cellular connectivity (LTE CAT-M) and the MSA Grid platform: real-time visibility of workers and work sites, with no IT infrastructure.
LTE CAT-MMSA Grid7.6 m drop
Pumped detector, up to 6 gases
ALTAIR 5X / 5X PID
Sensors that last more than twice the industry average and a PID for VOCs – ideal for HazMat, fire investigation and confined spaces. Also measures HCN, Cl₂, NH₃ and IR gases.
Up to 6 gasesPID 0–2000 ppmUp to 18 h
Automated test system
GALAXY GX2
Simple, smart bump testing and calibration for the ALTAIR 2X, ALTAIR Pro, ALTAIR 4XR and ALTAIR 5X – as a stand-alone or networked unit.
Up to 10 detectorsRFID
Probes and test lines
Test accessories
The ALTAIR pump probe takes samples up to 30 m away and turns a diffusion detector into a pumped detector.
Up to 30 m
Calibration and bump testing
All electrochemical sensors lose sensitivity over time. That is why detectors must be maintained and calibrated regularly.
| Bump test | Checks that the sensors and alarms respond and that the gas path is not blocked. Best practice: every day, before use. |
| Calibration | Adjusts the sensor reading against a gas of known concentration and compensates for loss of sensitivity. |
| GALAXY GX2 | Runs the test and calibration automatically and keeps the records. |
Kits by application
Three levels: basic (regulatory compliance), medium (more comfort) and premium (best in class).
Without a guardrail, workers on scaffolding are “at risk”: full-body harness (EN 361) with a short lanyard (EN 355) or a fall arrester (EN 360).
BasicV-FORM scaffolding kit
Code 10194468V-FORM harness (10180184) · 1.5 m twin-leg energy-absorbing lanyard, steel scaffold hook (10185612) · bag
MediumV-FORM lightweight scaffolding kit
Code 10194467V-FORM harness (10180184) · 1.8 m multi-layer lanyard, aluminium hook (10185614) · bag
PremiumV-FIT premium scaffolding kit
Code 10194471V-FIT harness (10180198) · 1.8 m twin-leg lanyard, aluminium hook (10185615) · bag
Full-body harnesses
V-FORM and V-FIT harnesses
Full-body harnesses that fit everyone, with 3 to 5 adjustment points and Qwik-FIT quick buckles.
EN 3613–5 adjustment points
Self-retracting devices
V-TEC SRL and PFL
Choose the right length: 1.8 m and 3 m PFL or 6 m SRL, with energy-absorbing technology that needs no calibration.
EN 3601.8 m · 3 m · 6 m
Personal rescue device
Latchways PRD
Integrated into the full-body harness: after a fall it lowers the user to a safe place in a controlled way and greatly shortens the rescue time.
Self-rescueLightweight
Self-retracting device
Latchways SRL
SRLs in lengths of 6–40 m, including sealed versions for harsh environments, with a full-contact braking mechanism.
EN 3606–40 mATEX versions
Winch for raising, lowering and rescue
MSA Workman winch
For raising, lowering and positioning people and materials, and for rescue without entering the space. Used with the MSA Workman Tripod and fitted without tools.
EN 1496 class BUp to 225 kgInspection every 6 months
Anchor point
MSA Workman Tripod
Aluminium tripod – an ideal anchor point for tasks with limited staff. With the Workman winch and rescuer it forms a complete confined-space entry system.
19.5 kgMax. height 245 cmCode 10116521
Rescue accessory
MSA Workman spreader bar
Connected to the loops of V-FORM harnesses, it is used to retrieve people from confined spaces, even when the casualty has injured arms.
EN 354Code 10115550
Need a complete solution?
Tell us about the application and the hazards – we will prepare a quote and an MSA equipment configuration for your team.